Industrial Specialities
AVAILABLE LUBRICANTS
SYNTHETIC ALL PURPOSE AEROSOL LUBRICANT
Habot H - ALL-IN-ONE is a general purpose aerosol spray. Formulated with synthetic base oils, incorporating anti-wear, anti-corrosion and EP additives.
• 100% Ultra Performance, synthetic base oils
• High polarity and lubricity
• Excellent penetration to pin/bush joint area
• High solvency – keeps chains clean
• Outstanding thermal stability – Limits carbon build-up on chains
• Good anti-wear and extreme pressure properties
• Offers energy savings
• Excellent general purpose lubricant
Most chain applications operating from -25°C to 235°C. Tenter frame applications operating under
high heat and high stretch conditions. Plain and anti-friction bearings. Cams and sliding surfaces.
Pentrating oil. Also suitable for the lubrication of weapons. Eg. Hand guns.
Properties Test Method Units Typical Results
Viscosity @ 40°C ASTM D445 cSt 65
Pour Point ASTM D6749 °C – 29°C
Flash Point ASTM D92 °C 280
PACK SIZES:
12 x 200ml Aerosol Cans
12 x 400ml Aerosol Cans
H - UNIPHARM WO 68
Habot H - UNIPHARM WO 68 is a purifi ed mixture of liquid saturated hydrocarbons. It is a colourless, transparent oily liquid and is essentially odourless and tasteless. It is obtained from petroleum through several refi ning stages. The product is manufactured to exceed the purity requirements of the Pharmacopoeias. Due to its superior chemical inertness, it demonstrates better colour and oxidative stability than most mineral and vegetable oils, when stored and used under controlled conditions
Habot H – UNIPHARM WO 68 meets the requirements of the following specifi cations:
• USA FDA, 21 CFR 172.878 and 21 CFR 178.3620(a), White Mineral Oil
• US Pharmacopoeia, most recent edition, Mineral Oil
• National Sanitation Foundation (NSF), registration number 125038
• European Pharmacopoeia, most recent edition, Liquid Paraffi n
WATER BASED DEGREASER
.Habot H - Degreaser is a highly eff ective, highly concentrated, water based degreaser which contains no solvents. It is environmentally friendly - will not harm fi sh or plant life. It has a powerful detergent action.
• Cleaning Industrial Equipment
• Domestic use
• Automotive, Motorcycle and Marine Cleaner
• Industrial and Domestic Flooring
Dilute up to 15 to 1.
Best results for stubborn grime at 4 to 1.
Spray on or brush on.
Properties Test Method Units Typical Results
Colour Visual Red
Freezing Point °C – 2°C
Density @ 20°C ASTM D4052 g/cm3 1.02
PACK SIZES:
25L Pails
OPEN GEAR DRESSING
Habot H - 8022T is a black tacky grease mainly intended for open gears but can be used for other applications dipper sticks, fi fth wheels, kiln gear rollers and wire ropes. Incorporated is solid lubricants and tackiness additive.
• Excellent adhesion to metal surfaces
• Good rust and corrosion protection
• Unsurpassed water resistance
• Wide operating temperature range
• Easily applied in cold weather
• Outstanding load carrying capability
Open gears
Dipper sticks
Fifth wheels
Kiln rollers and tyres
Gear couplings
Wire ropes
Properties Test Method Units Typical Results
Colour and texture Black, tacky
NLGI No 00
Worked Penetration ASTM D217 Mm/10 365
Four Ball Wear Test IP 239 mm 0.65
Timken O.K. Load ASTM D2509 Kg 27
Four Ball EP Test,
Weld Load IP 239 Kgf >800
Weld Load ASTM D2596 Kg 50
PACK SIZES:
25Kg Pails
180Kg Drum
ULTRA PERFORMANCE HIGH TEMP CHAIN OIL
Habot H - CHAIN OIL HEAVY is blended from 100% Ultra Performance, synthetic base oils incorporating anti-wear and extreme pressure additives.
• High polarity and lubricity
• Excellent penetration to pin/bush joint area
• High solvency – keeps chains clean
• Removes existing deposits
• Outstanding thermal stability -Limits carbon build-up on chains
• Good anti-wear and extreme pressure properties
• Offers energy savings
Most chain applications operating from -25°C to 230°C.
Tenter frame applications operating under high heat and high stretch conditions.
Plain and anti-friction bearings.
Cams and sliding surfaces.
Cutting, drilling and tapping fluid.
Properties Test Method Units Typical Results
Colour Light amber
Viscosity @ 40°C ASTM D445 cSt 117.0
Viscosity @ 100°C ASTM D445 cSt 16.00
Viscosity Index 145
Pour Point ASTM D6749 °C -32
Flash Point ASTM D92 °C 260
Density @ 20°C ASTM D4052 Kg/l 0.9
PACK SIZES:
6 x 1L Cases
4 x 5L Cases
25L Pails
210L Drums
12 x 400ml Aerosol Cans
ULTRA PERFORMANCE HIGH TEMP CHAIN OIL
Habot H - CHAIN OIL LIGHT UP is blended from 100% Ultra Performance, synthetic base oils incorporating anti-wear and extreme pressure additives
ADVANTAGES
• High polarity and lubricity
• Excellent penetration to pin/bush joint area
• High solvency – keeps chains clean
• Removes existing deposits
• Outstanding thermal stability -Limits carbon build-up on chains
• Good anti-wear and extreme pressure properties
• Offers energy savings
• Excellent general purpose lubricant
Most chain applications operating from -25°C to 235˚C.
Tenter frame applications operating under high heat and high stretch conditions.
Plain and anti-friction bearings cams and sliding surfaces
• Mechanical applicator Bottle oiler
• Drip oiler Oil can
• Brush-type oiler Brush
• Spray or mist
• Aerosol can
Properties Test Method Units Typical Results
Colour Purple
Viscosity at 40°C ASTM D445 cSt 55.00
Viscosity at 100°C ASTM D445 cSt 9.400
Viscosity Index 165
Pour Point ASTM D6749 °C -29
Flash Point ASTM D92 °C 280
Density @ 20°C ASTM D4052 Kg/l 0.9
6 x 1L Cases
4 x 5L Cases
25L Pails
210L Drums
12 x 400ml Aerosol Cans
12 x 200ml Aerosol Cans
SYNTHETIC HEAT TRANSFER OIL
Habot H - HTO T66 is a high performance highly stable synthetic heat transfer fl uid off ering extended life and very low top-up rates resulting in reduced running costs and minimal downtime for operations at temperatures up to 345°C. It has an outstanding performance from the unique stability of the polyphenyl structure. Intended for use in systems operating at or near atmospheric pressure, off ers potential savings in both capital and operating costs.
• Universally applicable heat transfer fluid
• Excellent thermal stability – can be used at temperatures above 300°C
• Wide operating temperature range
• High boiling point
• Excellent viscosity properties allows both high and low temperature operation with one fluid
• Unlimited life below 300°C
• At 340°C only 40% decomposition in one year
• Breakdown products remain completely dissolved in the fluid and will not separate even on cooling
• No carbon and coke deposits on heat-exchanger surfaces and piping
• Non-toxic
• Non-corrosive
Habot H – HTO T66 is use in process heating and waste heat recovery applications: resin
manufacture, phthalic anhydride distillation, polyester film and fibre production, deodorizing fatty
acids, phenol production, polyamide polymerization and extrusion, preheating combustion air in the
steel and petrochemical furnaces.
Properties Test Method Units Typical Results
Appearance Visual Clear pale yellow liquid
Viscosity @ 40°C ASTM D445 cSt 29.64
Pour Point ASTM D6749 °C -32
Flash Point ASTM D92 °C 170
Fire Point ASTM D92 °C 216
Maximum Film
Temperature °C 375
Total Acidity Mg KOH/g <0.02
Density @ 20°C ASTM D4052 kg/m3 1011
PACK SIZES:
25L Pails
210L Drums
