Food Grade Lubricants
AVAILABLE LUBRICANTS
SYNTHETIC LUBRICANT FOR HIGH TEMPERATURES FOOD GRADE
Habotec - CHAIN OIL FG 320 is a fully synthetic lubricant composed of the most advanced solid components which provide an excellent lubrication up to 650ºC. The synthetic additives evaporate between 250ºC and 300ºC, giving the material one dry fi lm which supports temperatures up to 650ºC. This product maintains an extra elasto-hydrodynamic lubrication up to 200ºC; mixed lubrication between 200ºC and 300ºC and dry fi lm lubrication from 300ºC to above 600ºC.
•
High capacity to support high loads and excellent anti-wear properties
• Extraordinary thermic stability and antioxidant behaviour.
• Reduces mud formation and carbonic sediments
• High lubricant capabilities up to 650ºC
The product can be applied in the chains even if the machine is working. Compared to graphite
products, for this one it is not needed to stop the oven to lubricate.
Habotec – CHAIN OIL FG 320 meet or exceed the following performance profi les:
NSF Non-food compound listing – H1 (154988)
It meets the FDA 21 CFR 178.3750 specifi cations.
TYPICAL PROPERTIES
Properties Test Method Units Typical Results
ISO Grade 320
Viscosity @ 40°C ASTM D445 cSt 320
Viscosity @ 100°C ASTM D445 cSt 35
Viscosity Index 150
Flash point ASTM D92 °C 290
Pour Point ASTM D5950 °C -40
Four ball test EP
welding load IP 239 Kg 200
Four ball wear scar
diameter 1hour/40Kg IP 239 mm 0.49
SRV, 180°C, 600N,
45 min, 50Hz, Ball
scar diameter mm 0.58
PACK SIZES:
6 x 1L Cases
4 x 5L Cases
25L Pails
210L Drums
1000L IBC
GREASE
Habotec - FG-2 GREASE has been formulated with raw materials included in positive lists of FDA, and can be used wherever the lubricant may be in accidental contact with food.
• Equipment in refrigerating units
• Chains in Food grade plants
• Packing and fi lling industry
• Bearings in Fish and Meat Industry
• Bearings in Food Industry
TYPICAL PROPERTIES
Properties Test Method Units Typical Results
NLGI No. 2
Thickener, soap type Calcium
Base Oil Viscosity @ 40°C ASTM D445 cSt 180
Penetration @ 25°C 265-295
4 Ball Tests:
• Welding load IP 239 Kg Min 200
• Wear scar diameter
1h/40kg Mm Max 0.60
Drop Point ASTM D2265 °C Min 145
Oxidation Stability,
100h/100°C ASTM D942 Max 0.5
Colour VISUAL White
PACK SIZES:
12 x 400g Cartridges
6 x 1Kg Pails
4.5Kg Pails
22.5Kg Pails
180Kg Drums
FOOD GRADE OIL
HABOT Oil (Pty) Ltd in partnership with NOVVI LLC in USA, have developed a unique renewable, biodegradable technology, based on NovaSpec range of base oils, pioneered by Novvi. NovaSpec base oils are produced from plant sugar, which are converted to pure hydrocarbon molecules through an advanced industrial biotechnology platform. Due to this unique technology developed by Novvi that the NovaSpec base oils are purer and contain none of the impurities found in the conventional base oils derived from crude petroleum. Is formulated with the highest levels of performance and reduced environmental impact. Operating cost reduction is expected based on decreased energy consumption and extended drain intervals. Is compatible with mineral oils and can be used to top up and replace existing fl uids.
• Excellent corrosion protection. Fast air release resulting in increased lubrication
• High oxidation and thermal stability – minimising sludge and deposit formation
• Environmentally friendly, renewable biodegradable, and non-toxic
• Reduced energy consumption and extended drain intervals
• Compatible with mineral and PAO-based lubricants
Can be used where incidental food contact may occur.
Rotary screw, vane, turbine and reciprocating air compressors.
Suitable for some process – gas compressors.
Habotec – Compressor Oils FG meet or exceed the following performance profi les:
• NSF Non-food compound listing – H1 (153788; 153789; 153790)
• ISO 11158 (HV)
• DIN 51524, p.1, p.2 and p.3 (HL, HLP, HVLP)
• US Steel 127 and 136
• ISO 12925 (CKB, CKC)
• DIN 51517, p.1, and p.2 (C, CL)
• AGMA 9005-E02 (RO, EP)
• David Brown S1.53.106
TYPICAL PROPERTIES
Properties Test Method Units Typical Results
NSF No. 153788 153789 153790
ISO Grade 32 46 68
Viscosity @ 40°C ASTM D445 cSt 32 46 68
Viscosity @ 100°C ASTM D445 cSt 5.9 7.5 9.8
Viscosity Index 131 126 127
Flash point ASTM D92 °C 238 254 254
Pour Point ASTM D97 °C <-42 -51 <-42
Copper Corrosion ASTM D130 1a 1a 1a
Density @ 20°C ASTM D4052 °C 0.83 0.83 0.83
PACK SIZES:
6 x 1L Cases
4 x 5L Cases
25L Pails
210L Drums
1000L IBC
FOOD GRADE OIL
HABOT Oil (Pty) Ltd in partnership with NOVVI LLC in USA, have developed a unique renewable, biodegradable technology, based on NovaSpec range of base oils, pioneered by Novvi. NovaSpec base oils are produced from plant sugar, which are converted to pure hydrocarbon molecules through an advanced industrial biotechnology platform. Due to this unique technology developed by Novvi that the NovaSpec base oils are purer and contain none of the impurities found in the conventional base oils derived from crude petroleum. They are formulated with the highest levels of performance and reduced environmental impact. Operating cost reduction is expected based on decreased energy consumption and extended drain intervals. Compatible with mineral oils and can be used to top up and replace existing fl uids.
•
Excellent corrosion protection. Fast air release resulting in increased lubrication
• High oxidation and thermal stability – minimising sludge and deposit formation
• Environmentally friendly, renewable biodegradable, and non-toxic
• Reduced energy consumption and extended drain intervals
• Compatible with mineral and PAO-based lubricants
Can be used where incidental food contact may occur.
All types of hydraulic systems.
May also be used in circulatory systems
Rotary screw, vane, turbine and reciprocating air compressors.
General purpose lubrication.
SPECIFICATIONS MET
Habotec – Hydraulic Fluids FG meet or exceed the following performance profi les:
• NSF Non-food compound listing – H1 (153791; 153792; 153793)
• ISO 11158 (HV)
• DIN 51524, p.1, p.2 and p.3 (HL, HLP, HVLP)
• US Steel 127 and 136
• ISO 12925 (CKB, CKC)
• DIN 51517, p.1, and p.2 (C, CL)
• AGMA 9005-E02 (RO, EP)
• David Brown S1.53.106
PACK SIZES:
6 x 1L Cases
4 x 5L Cases
25L Pails
210L Drums
1000L IBC
TYPICAL PROPERTIES
Properties Test Method Units Typical Results
NSF No 153791 153792 153793
ISO Grade 32 46 68
Viscosity @ 40°C ASTM D445 cSt 32 46 68
Viscosity @ 100°C ASTM D445 cSt 5.9 7.5 9.8
Viscosity Index 131 126 127
Flash point ASTM D92 °C 238 254 254
Pour Point ASTM D97 °C <-42 -51 <-42
Copper Corrosion ASTM D130 1a 1a 1a
Density @ 20°C ASTM D4052 °C 0.83 0.83 0.83
FOOD GRADE OIL
HABOT Oil (Pty) Ltd in partnership with NOVVI LLC in USA, have developed a unique renewable, biodegradable technology, based on NovaSpec range of base oils, pioneered by Novvi. NovaSpec base oils are produced from plant sugar, which are converted to pure hydrocarbon molecules through an advanced industrial biotechnology platform. Due to this unique technology developed by Novvi that the NovaSpec base oils are purer and contain none of the impurities found in the conventional base oils derived from crude petroleum. Formulated with the highest levels of performance and reduced environmental impact. Operating cost reduction is expected based on decreased energy consumption and extended drain intervals. Compatible with mineral oils and can be used to top up and replace existing fl uids.
•
Excellent corrosion protection. Fast air release resulting in increased lubrication
• High oxidation and thermal stability – minimising sludge and deposit formation
• Environmentally friendly, renewable biodegradable, and non-toxic
• Reduced energy consumption and extended drain intervals
• Reduces gear and bearing wear
• Good wear and extreme pressure protection
• Compatible with mineral and PAO-based lubricants
Can be used where incidental food contact may occur.
Designed for use in enclosed gearboxes.
All enclosed spiral, beval, hypoid, herringbone and worm gear units.
Bushes, cams and sliding surfaces.
Habotec – Gear Oils FG meet or exceed the following performance profi les:
• NSF Non-food compound listing – H1 (153794; 153795; 153796)
• ISO 11158 (HV)
• DIN 51524, p.1, p.2 and p.3 (HL, HLP, HVLP)
• US Steel 127 and 136
• ISO 12925 (CKB, CKC)
• DIN 51517, p.1, and p.2 (C, CL)
• AGMA 9005-E02 (RO, EP)
• David Brown S1.53.106
PACK SIZES:
6 x 1L Cases
4 x 5L Cases
25L Pails
210L Drums
1000L IBC
TYPICAL PROPERTIES
Properties Test Method Units Typical Results
NSF No 153794 153795 153796
ISO Grade 150 220 320
Viscosity @ 40°C ASTM D445 cSt 150 220 320
Viscosity @ 100°C ASTM D445 cSt 18.1 23.7 30.2
Viscosity Index 128 131 130
Flash point ASTM D92 °C >255 >255 >255
Pour Point ASTM D97 °C <-20 >-19 >-15
Copper Corrosion ASTM D130 1a 1a 1a
Density @ 20°C ASTM D4052 °C 0.84 0.86 0.87
