Automotive Lubricants
AVAILABLE LUBRICANTS
ULTRA PERFORMANCE SYNTHETIC ENGINE OIL
Habot H - 5W40 UP is a fully synthetic passenger motor car engine oil for use in high performance vehicles. Blended using Full synthetic base stocks (Polyalpholefi ns - PAO’s and Synthetic Esters), in combination with advanced additive packages giving extended engine oil life, ultimate engine protection, performance and fuel effi ciency under the most extreme driving conditions.
• Increased engine performance, power and efficiency
• Excellent film strength
• Highly shear resistant for “stay in grade” ability
• Exceptional oxidation resistance
•Easy low temperature starting reducing engine wear giving excellent low temperature protection
• Reduced engine wear
• High Viscosity Index
• Improved fuel economy
• Longer engine oil Life – extended oil drain intervals
• Cooler engine operating temperatures
• Excellent detergency and dispersiveness
• High oxidation and thermal stability – no sludge or varnish
• Resists oil breakdown from heat, blow-by chemicals and oxygen up to ten times longer than
conventional oils
• No engine deposits
Intended for all high performance, high revving, turbo charged, fuel injected, multi-valve and
naturally aspirated passenger car, SUV and racing engines.
Habot H – 5W40 UP engine oil meets or exceeds the following performance profi les:
• API SN/CF ACEA A-3, B-4-12
• VW 502.00/505.00;
• MB229.3;
• BMWLL – 01 (Longlife)
• GM-LL-B-025;
• Renault RN 710/700;
• PORSCHE A40; PSA B71 226
TYPICAL PROPERTIES
Properties Test Method Units Typical Results
SAE Viscosity grade 5W40
Appearance Bright and Clear
Viscosity @ 40°C ASTM D455 cSt 86
Viscosity @ 100°C ASTM D455 cSt 15.7
Viscosity Index 195
Pour Point ASTM D5950 °C -54
Flash Point ASTM D92 °C 224
Total Base No. ASTM D2896
Mg KOH/g 13
PACK SIZES:
6 x 1L Cases
4 x 5L Cases
25L Pails
210L Drums
1000L IBC
SUPERIOR PERFORMANCE ENGINE OIL
Habot H - 5W40 SP is a synthetic passenger motor engine oil, for use in high performance petrol and diesel (without DPF - diesel particulate fi lters) engines. Blended from synthetic base stocks in combination with advanced additive packages, giving increased power and effi ciency whilst keeping the engines clean of sludge and engine deposits.
• Excellent low temperature starting
• Increased engine performance
• Excellent low temperature protection
• Reduced engine wear – maximising engine life
• Low friction coeffi cient – Improved fuel economy
• Longer life – extended oil drain intervals
• Reduced oil consumption
• Excellent detergency and dispersiveness – reduced sludge and deposits
• High oxidation and thermal stability – no sludge or varnish
• Compatible with petroleum based or other synthetic oils
Intended for high performance turbo charged and naturally aspirated motor car engines,
protecting against wear in demanding daily traffi c conditions.
Habot H – 5W40 SP engine oil meets or exceeds the following performance profi les and
manufacturer recommendations:
• API SN/CF
• ACEA A-3, B-4-12
• VW 502.00/505.00 (formal Approval)
• MB229.3
• BMWLL – 01 (Longlife)
• GM-LL-B-025
• Renault RN 710/700
• PORSCHE A40
• PSA B71 226
TYPICAL PROPERTIES
Properties Test Method Units Typical Results
SAE Viscosity grade 5W40
Appearance Bright and Clear
Viscosity @ 40°C ASTM D455 cSt 86
Viscosity @ 100°C ASTM D455 cSt 13
Viscosity Index 150
Pour Point ASTM D5950 °C -54
Flash Point ASTM D92 °C 224
Total Base No. ASTM D2896
Mg KOH/g 12
Density @ 20°C ASTM D4052 Kg/L 0.9
PACK SIZES:
6 x 1L Cases
4 x 5L Cases
25L Pails
210L Drums
1000L IBC
ULTRA PERFORMANCE SYNTHETIC ENGINE OIL
Habot H - 15W40 UP is a fully synthetic heavy duty engine oil for use in high performance vehicles. Blended using full synthetic base stocks (Polyalpholefi ns - PAO’s and Synthetic Esters), in combination with advanced additive packages giving extended engine oil life, ultimate engine protection, performance and fuel effi ciency under the most extreme driving conditions.
• Increased engine performance, power and efficiency
• Excellent film strength
• Highly shear resistant for “stay in grade” ability
• Exceptional oxidation resistance
•Easy low temperature starting reducing engine wear giving excellent low temperature protection
• Reduced engine wear
• High Viscosity Index
• Improved fuel economy
• Longer engine oil life – extended oil drain intervals
• Cooler engine operating temperatures
• Excellent detergency and dispersiveness
• High oxidation and thermal stability – no sludge or varnish
•Resists oil breakdown from heat, blow-by chemicals and oxygen up to ten times longer than conventional oils
• No engine deposits
Habot H – 15W40 UP is intended for the lubrication of heavy duty turbo charged and naturally
aspirated diesel engines. Civil construction heavy duty equipment protecting against wear in
demanding harsh conditions. Can also be used in petrol engines.
SPECIFICATIONS MET
Habot H – 15W40 UP engine oil meets or exceeds the following performance profi les:
• API CI-4 / CF / SL. ACEA E7-12 / A3/B3/B4-13
• MB 229.1 / 228.3 (Blanket Approval)
• VOLVO VDS-3
• MAN M3275-1
• MTU Type 2
• MACK EO-N
• RENAULT TRUCKS RLD-2
• CUMMINS CES 20076/77/78, DEUTZ DQC-III-10, CATERPILLAR ECF-2, ECF1a
• JASO DH-1, GLOBAL DHD-1
TYPICAL PROPERTIES
Properties Test Method Units Typical Results
SAE Viscosity Grade 15W40
Appearance Bright and Clear
Colour Amber
Viscosity @ 40°C ASTM D445 cSt 104
Viscosity @ 100°C ASTM D445 cSt 15.8
Viscosity Index 163
Total Base No. ASTM 2896
Mg KOH/g 12.0
Density @ 20°C AASTM D4052 Kg/L 0.87
PACK SIZES:
6 x 1L Cases
4 x 5L Cases
25L Pails
210L Drums
1000L IBC
SUPERIOR PERFORMANCE ENGINE OIL
Habot H - 15W40 SP is blended from Synthetic base oils in combination with a superior additive package. It is intended to be used in both turbocharged and naturally aspirated diesel and petrol engines. Giving increased power and effi ciency whilst keeping the engines clean of sludge and engine deposits.
• Excellent low temperature starting
• Increased engine performance
• Excellent low temperature protection
• Reduced engine wear – maximising engine life
• Low friction coefficient – Improved fuel economy
• Longer life – extended oil drain intervals
• Reduced oil consumption
• Excellent detergency and dispersiveness – reduced sludge and deposits
• High oxidation and thermal stability – no sludge or varnish
• Compatible with petroleum based or other synthetic oils
Habot H – 15W40 SP is intended for turbo charged and naturally aspirated petrol and diesel
engines. Civil construction heavy duty equipment protecting against wear in demanding
harsh conditions. Can also be used in petrol engines.
Habot H – 15W40 SP engine oil meets or exceeds the following performance profi les:
• API CI-4 / CF / SL
• ACEA E7-12 / A3/B3/B4-13
• MB 229.1 / 228.3 (Blanket Approval)
• VOLVO VDS-3
• MAN M3275-1
• MTU Type 2
• MACK EO-N
• RENAULT TRUCKS RLD-2
• CUMMINS CES 20076/77/78
• JASO DH-1, GLOBAL DHD-1
• DEUTZ DQC-III-10
• CATERPILLAR ECF-2, ECF1a
TYPICAL PROPERTIES
Properties Test Method Units Typical Results
SAE Viscosity Grade 15W40
Appearance Bright and Clear
Viscosity at 40°C ASTM D445 cSt 107.8
Viscosity at 100°C ASTM D445 cSt 15.4
Viscosity Index 150
Total Base No. ASTM D2896 Mg KOH/g 12
Pour Point ASTM D6749 °C -15
Flash Point ASTM D92 °C 220
Density @ 20°C ASTM D4052 Kg/L 0.9
PACK SIZES:
6 x 1L Cases
4 x 5L Cases
25L Pails
210L Drums
1000L IBC
HEAVY DUTY DIESEL ENGINE OIL
Habot H - 15W40 HP is blended from GR II base oils in combination with a superior additive package. It is intended to be used in both turbocharged and naturally aspirated diesel and petrol engines. Giving increased power and effi ciency whilst keeping the engines clean of sludge and engine deposits.
• Specifically, formulated with superior Group II base fluids and high performance additives package.
• Increased engine performance and cleanliness
• High oxidation and thermal stability – no sludge or varnish
• No engine deposits
• Suitable for Turbo charged and normally aspirated engines
• Petrol and Diesel
Habot H – 15W40 HP is intended for the lubrication of heavy duty turbo charged and naturally
aspirated diesel engines. Civil construction heavy duty equipment protecting against wear in
demanding harsh conditions. Can also be used in petrol engines.
Habot H – 15W40 HP meets or exceeds the requirements of:
• API CI-4 / CF / SL
• ACEA E7-12 / A3/B3/B4-13
• MB 229.1 / 228.3 (Blanket Approval)
• VOLVO VDS-3
• MAN M3275-1
• MTU Type 2
• MACK EO-N
• RENAULT TRUCKS RLD-2
• CUMMINS CES 20076/77/78
• JASO DH-1, GLOBAL DHD-1
• DEUTZ DQC-III-10
• CATERPILLAR ECF-2, ECF1a
TYPICAL PROPERTIES
Properties Test Method Units Typical Results
SAE Viscosity grade 15W40
Appearance Bright and Clear
Viscosity @ 40°C ASTM D445 cSt 104
Viscosity @ 100°C ASTM D445 cSt 13.8
Viscosity Index 133
Total Base No. ASTM D2896
Mg KOH/g 12.0
Density @ 20°C ASTM D4052 Kg/L 0.87
PACK SIZES:
6 x 1L Cases
4 x 5L Cases
25L Pails
210L Drums
1000L IBC
ULTRA PERFORMANCE ENGINE OIL
Habot H - 20W50 is a fully Synthetic passenger motor car engine oil for use in high performance vehicles. Blended using full synthetic base stocks (Polyalpholefi ns - PAO’s and Synthetic Esters), in combination with advanced additive packages giving extended engine oil life, ultimate engine protection, performance and fuel effi ciency under the most extreme driving conditions.
• Increased engine performance, power and effi ciency
• Excellent fi lm strength
• Highly shear resistant for “stay in grade” ability
• Exceptional oxidation resistance
•Easy low temperature starting reducing engine wear giving excellent low temperature protection
• Reduced engine wear
• High Viscosity Index
• Improved fuel economy
• Longer engine oil Life – extended oil drain intervals
• Cooler engine operating temperatures
• Excellent detergency and dispersiveness
• High oxidation and thermal stability – no sludge or varnish
• Resists oil breakdown from heat, blow-by chemicals and oxygen up to ten times longer than
conventional oils
• No engine deposits
Intended for motor cars with turbo charged and naturally aspirated engines. Can also be used
in diesel engines.
Habot H – 20W50 engine oil meets or exceeds the following performance profi les:
• API CI-4 / CF / SL. ACEA E7-12 / A3/B3/B4-13
• MB 229.1 / 228.3 (Blanket Approval)
• VOLVO VDS-3
• MAN M3275-1
• MTU Type 2
• MACK EO-N
• RENAULT TRUCKS RLD-2
• CUMMINS CES 20076/77/78, DEUTZ DQC-III-10, CATERPILLAR ECF-2, ECF1a
• JASO DH-1, GLOBAL DHD-1
TYPICAL PROPERTIES
Properties Test Method Units Typical Results
SAE Viscosity grade 20W50
Appearance Bright and Clear
Total Base No. ASTM D2896
Mg KOH/g 12
Viscosity @ 40°C ASTM D445 cSt 108
Viscosity @ 100°C ASTM D445 cSt 18.5
Viscosity Index 192
Density @ 20°C ASTM D4052 Kg/L 0.9
PACK SIZES:
6 x 1L Cases
4 x 5L Cases
25L Pails
210L Drums
1000L IBC
HIGH PERFORMANCE ENGINE OIL
Habot H - 20W50 HP is blended from GR II base oils in combination with a superior additive package. It is intended to be used in both turbocharged and naturally aspirated diesel and petrol engines. Giving increased power and effi ciency whilst keeping the engines clean of sludge and engine deposits.
• Most up to date combination of Group II base fluids and additives
• Increased engine performance
• Easy low temperature starting
• Reduced engine wear
• Low friction
• Low volatility
• Cooler engine operating temperature
• Excellent detergency and dispersancy
• High oxidation and thermal stability – no sludge or varnish
• No engine deposits
Habot H – 20W50 HP is intended for motor cars with turbo charged and naturally aspirated
engines. Can also be used in diesel engines.
Habot H – 20W50 HP meets or exceeds the requirements of:
• Exceeds the requirements for API service classifications SL and CG-4
• ACEA A3/B3-10/B4-08
• MB 228.3 and 229.1
• VW 505.00
• VOLVO VDS Level
TYPICAL PROPERTIES
Properties Test Method Units Typical Results
SAE Viscosity grade
20W50
Total Base No. ASTM D2896 Mg KOH/g 12
Viscosity @ 40°C: ASTM D445 cSt 127
Viscosity @ 100°C ASTM D445 cSt 21.5
Viscosity Index ASTM D2270 120
Specifi c Gravity ASTM D4052 Kg/L 0.87
PACK SIZES:
6 x 1L Cases
4 x 5L Cases
25L Pails
210L Drums
1000L IBC
SYNTHETIC 4 STROKE ENGINE OIL 15W40
Habot H - MCO is a fully synthetic 4 stroke engine oil for use in high performance motorcycles. Blended using full synthetic base stocks (Polyalpholefi ns - PAO’s and Synthetic Esters), in combination with advanced additive packages giving extended engine oil life, ultimate engine protection, performance and fuel effi ciency under the most extreme driving conditions. Suitable for V-TWIN engines.
•
Increased engine performance, power and efficiency
• Excellent film strength
• Highly shear resistant for “stay in grade” ability
• Exceptional oxidation resistance
• Easy low temperature starting reducing engine wear giving excellent low temperature protection
• Reduced engine wear
• High Viscosity Index
• Improved fuel economy
• Longer engine oil life – extended oil drain intervals
• Cooler engine operating temperatures
• Excellent detergency and dispersancy
• High oxidation and thermal stability – no sludge or varnish
• Resists oil breakdown from heat, blow-by chemicals and oxygen up to ten times longer than
conventional oils.
• No engine deposits
Habot H – MCO is formulated for 4 stroke motorcycles, which includes, inter alia, Suzuki,
Honda and Harley Davidson.
Habot H – MCO synthetic engine oil meets or exceeds the following performance profi les:
• JASO MA2 (T903:2011)
• JASO MA (T903:2011)
• JASO MB (T903:2011)
• API SJ
TYPICAL PROPERTIES
Properties Test Method Units Typical Results
SAE Viscosity Grade 15W40
Appearance Bright and Clear
Viscosity at 40°C ASTM D445 cSt 103
Viscosity at 100°C ASTM D445 cSt 15.70
Viscosity Index 163
Total Base No. ASTM D2896
mgKOH/g 12
Pour Point ASTM D6749 °C > -35
Flash Point ASTM D92 °C 220°C
Density @ 20°C ASTM D4052 Kg/L 0.9
PACK SIZES:
6 x 1L Cases
4 x 5L Cases
25L Pails
210L Drums
1000L IBC
SYNTHETIC AUTOMOTIVE GEAR OILS
Habot H - EP80W90 UP & H - EP85W140 UP are Ultra Performance automotive gear oils are blended from synthetic base oils, (Polyalpholefi ns - PAO’s and Synthetic Esters), in combination with advanced additive packages, which results in excellent extreme pressure, anti-corrosion and anti-oxidation performance.
• Exceptional performance base fluids, PAO’s and synthetic esters
• Ultra-performance anti-wear and extreme pressure properties
• Extended gear and bearing life
• Maintains viscosity at extreme temperatures
• Excellent resistant to shock loading
• Outstanding thermal and oxidative stability -Long life
• No sludge build-up
• Low coefficient of friction – which results in energy savings
• Wide operating temperature range
• Easy gear change even in severest cold weather
Habot H – EP80W90 UP & H – EP85W140 UP is intended for automotive gearboxes and
diff erentials in motorcars, trucks and civil construction machinery requiring API GL 5 performance
levels.
Habot H – EP80W90 UP & H – EP85W140 UP meet or exceed the following performance profiles:
• MACK GO-G
• API GL4, GL5
• MTI
• US 224
• DIN 51517 PART III
TYPICAL PROPERTIES
Properties Test Method Units Typical Results
SAE Viscosity Grade
80W90 85W140
Appearance Bright and Clear Bright and Clear
Viscosity at 40°C ASTM D455 cSt 165 210
Viscosity at 100°C ASTM D455 cSt 20 25
Viscosity Index 142 148
Flash Point ASTM D92 °C 224 204
Fire Point ASTM D92 °C 240 244
Pour Point ASTM D97 °C -45 -43
PACK SIZES:
6 x 1L Cases
4 x 5L Cases
25L Pails
210L Drums
1000L IBC
SYNTHETIC AUTOMOTIVE GEAR OIL
Habot H - EP80W90 UP GL4 are Ultra Performance automotive gear oils is blended from synthetic base oils, (Polyalpholefi ns - PAO’s and Synthetic Esters), in combination with advanced additive packages, which results in excellent extreme pressure, anti-corrosion and anti-oxidation performance.
• Exceptional performance base fluids, PAO’s and synthetic esters
• Ultra performance anti-wear and extreme pressure properties
• Extended gear and bearing life
• Maintains viscosity at extreme temperatures
• Excellent resistant to shock loading
• Outstanding thermal and oxidative stability – long life
• No sludge build-up
• Low coefficient of friction – which results in energy savings
• Wide operating temperature range
• Easy gear change even in severest cold weather
Habot H – EP80W90 UP GL4 is intended for automotive gearboxes and diff erentials in
motorcars, trucks and civil construction machinery requiring API GL 4 performance levels. Can
also be used in industrial gearboxes requiring an ISO 320 and 460 viscosities.
Habot H – EP80W90 UP GL4 meet or exceed the following performance profi les:
• MACK GO-G
• API GL4
• MTI
• US 224
• DIN 51517 PART III
TYPICAL PROPERTIES
Properties Test Method Units
Typical Results
SAE Viscosity Grade 80W90
Appearance Bright and Clear
Viscosity at 40°C ASTM D455 cSt 165
Viscosity at 100°C ASTM D455 cSt 20
Viscosity Index 142
Flash Point ASTM D92 °C 224
Fire Point ASTM D92 °C 240
Pour Point ASTM D97 °C -45
PACK SIZES:
6 x 1L Cases
4 x 5L Cases
25L Pails
210L Drums
1000L IBC
This is theFULL SYNTHETIC AUTOMOTIVE GEAR OIL heading
Habot H - 75W80 UP GL4 is an ultra-performance automotive gear oil blended from synthetic base oils ( Pol yal phol efi ns - PAO’s and Syntheti c Esters), in combination with advanced additive packages, which results in excellent extreme pressure, anti-oxidation performance.
• Exceptional performance synthetic base fluids (PAO’s and Synthetic Esters)
• Specially formulated for gear boxes with “notchy” gear change
• Excellent anti-wear and extreme pressure properties
• Offers extended gear and bearing life
• Maintains viscosity at extreme temperature
• Excellent resistant to shock loading
• Outstanding thermal and oxidative stability -Long life
• No sludge build-up
• Low coefficient of friction – energy savings
• Wide operating temperature range.
• Easy gear change even in severest cold weather
Habot H – 75W80 UP GL4 is intended for automotive gearboxes requiring API GL 4
performance levels.
Habot H – 75W80 UP GL4 Full synthetic gear oil meets or exceeds the following performance profi les:
• API GL4
• MTI
• US 224
• DIN 51517 PART III
TYPICAL PROPERTIES
Properties Test Method Units Typical Results
SAE Viscosity Grade 75W80
Appearance Bright and Clear
Viscosity at 40°C ASTM D445 cSt 86 cSt
Viscosity at 100°C ASTM D445 cSt 14 cSt
Viscosity Index 150
Pour Point ASTM D °C -25
Flash Point ASTM D92 °C 235
Fire Point ASTM D92 °C 240
PACK SIZES:
6 x 1L Cases
4 x 5L Cases
25L Pails
210L Drums
1000L IBC
SYNTHETIC AUTOMOTIVE GEAR OIL
Habot H - 75W80 SP GL4 is a superior performance automotive gear oil blended from synthetic base oils in combination with advanced additive packages, which results in excellent extreme pressure, anti-corrosion and anti-oxidation performance.
•
High performance base fl uids
• Specially formulated for gear boxes with “notchy” gear change
• High anti-wear and extreme pressure properties
• Off ers extended gear and bearing life
• Maintains viscosity at extreme temperature
• Resistant to shock loading
• High thermal and oxidative stability
• No sludge build-up
• Low coeffi cient of friction – energy savings
• Wide operating temperature range
• Easy gear change even in severest cold weather
Habot H – 75W80 SP GL4 is intended for automotive gearboxes requiring API GL 4
performance levels. Can also be used in Industrial gearboxes requiring an ISO 68 and 100
viscosity classifi cation.
Habot H – 75W80 SP GL4 synthetic gear oil meets or exceeds the following performance profi les:
• API GL4
• MTI
• US 224
• DIN 51517 PART III
TYPICAL PROPERTIES
Properties Test Method Units Typical Results
SAE Viscosity Grade 75W80
Appearance Bright and Clear
Viscosity at 40°C ASTM D445 cSt 87
Viscosity at 100°C ASTM D445 cSt 13.5
Viscosity Index 150
Pour Point ASTM D6749 °C -20
Flash Point ASTM D92 °C 210
Density @ 20°C ASTM D4052 Kg/l 0.9
PACK SIZES:
6 x 1L Cases
4 x 5L Cases
25L Pails
210L Drums
1000L IBC
FOR MORE AUTOMOTIVE LUBRICANTS PLEASE SEND EMAIL TO ENQUIRIES@HABOT.CO.ZA
