Grease
AVAILABLE LUBRICANTS
SYNTHETIC GENERAL PURPOSE GREASE
Habot H - CL2 150S is a general purpose, extreme pressure grease. Clay thickener with synthetic hydrocarbon oil fortifi ed with extreme pressure, anti-corrosion, anti-oxidant and anti-wear additives which gives it excellent water washout, acid and alkali resistance.
• Long life due to the synthetic base oil
• High temperature stability
• Excellent water washout resistance
• Inhibited against rust and corrosion
• Resistant to moisture, acid and alkali
• Excellent mechanical stability
General purpose. Plain and anti-friction bearings even under high loads. Chemical plants.
Mining where extremes of water and corrosive conditions are experienced.
Can be used from -65°C to 177°C.
TYPICAL PROPERTIES
Properties Test Method Units Typical Results
NLGI NO. 2
Worked Penetration ASTM D217 Mm/10 265-295
Colour and texture Red, homogeneous
Base Oil Viscosity @ 40°C ASTM D445 cSt 150
Base Oil Viscosity @ 100°C ASTM D445 cSt 6
Drop Point ASTM D2265 °C 240 (min)
Operating Temp. Range °C
-25 To 150 (180 int.)
Timken OK Load ASTM D2509 Kg 25
Copper Corrosion
24h at 100°C ASTM D4048 1a
Water washout ASTM D1264 % 2
PACK SIZES:
12 x 400g Cartridges
6 x 1Kg Pails
4.5Kg Pails
22.5Kg Pails
180Kg Drums
HIGH TECH LITHIUM COMPLEX GREASE
Habot H - LX2-195 grease is a lithium-complex grease with EP additives for medium speed operated bearings and plain bearings. High resistance to water and excellent resistance to high temperatures and loads.
• High drop point
• Good resistance to heavy loads
• Outstanding anti-wear capacity
• Insoluble in water
• Good resistance to mechanic work
• Good protection against corrosion
• Good antioxidant capacity
• Long life
Habot H – LX2-195
grease can be used as long life grease in roller bearings, water pumps, electric
motors, couplings, cardan joints, and in general wherever high efficiency greases are needed with
severe requirements.
PACK SIZES:
12 x 400g Cartridges
6 x 1Kg Pails
4.5Kg Pails
22.5Kg Pails
180Kg Drums
TYPICAL PROPERTIES
Properties Test Method Units Typical Results
NLGI NO. 2
Colour Red
Thickener ASTM D128 Lithium Complex
Penetration at 25°C ASTM D217 mm/10 265 – 295
Drop Point °C ASTM D2265 Min 245
EMCOR corrosion test Max 1
Timken OK Load ASTM D2509 Lbs 60 min
Temperature range °C -28 to 235
Base Oil Viscosity @ 40°C ASTM D 445 cSt 195
New Code Old Code
HIGH TECH LITHIUM COMPLEX GREASE WITH MOLY
Habot H - LX2M 195 Grease with Moly is a long life lithium Complex grease, containing Molybdenum Disulphide. Intended for electric motor bearings, fans, extractors, pumps, vehicles bearings and wherever a high effi ciency grease is needed when operated under stringent conditions between –20ºC and +150ºC continuous temperatures and 170°C peak temperature.
• Contains molybdenum disulphide for added protection and reduced friction coefficient
• Premium quality base stocks using state of the art thickener technology
• Slight tack for good adhesion
• High resistance to water wash-out
• Resistant to acid and alkali media
• Offers excellent protection against corrosion
• Wide operating temperature range
• Excellent mechanical and shear stability
• Resistant to extreme pressure and shock loads
Habot H – LX2M 195 Grease with Moly is a lithium complex soap thickened grease with E.P.
additives for the grease lubrication of medium speed operated plain bearings. It is provided
with excellent anti-corrosive antioxidant and anti-wear capacity together with emergency
lubrication properties.
PACK SIZES:
12 x 400g Cartridges
6 x 1Kg Pails
4.5Kg Pails
22.5Kg Pails
180Kg Drums
TYPICAL PROPERTIES
Properties Test Method Units Typical Results
NLGI NO. 2
Colour Black
Thickener soap type Lithium Complex
Worked Penetration ASTM D217 265 – 295
Drop Point ASTM D566 °C Min 230
Operating Temp. °C -20 to 150
Peak Temperature °C 170
4 ball weld Load ASTM D2596 kg Min 450
Timken OK Load ASTM D2509 Lb >45
Base Oil Viscosity @ 40°C ASTM D445 195
4 Ball weld Load IP 239 Kg Min 450
Oxidation stability
100h/100°C ASTM D942 Kg/cm² Max 5
Timken OK Load ASTM D2509 Lb >45
Copper Corrosion ASTM D4048 Max 1b
HIGH TECH SYNTHETIC ALL PURPOSE GREASE
Habot H - LX2 - 250S High Tech Synthetic All Purpose Grease is a high performance lubricating grease capable of working at a wide range of temperatures (from -40 to 180ºC) in very stringent operating conditions. Specially formulated with synthetic base oil enhanced with high chemical and thermal resistance and a high lubricating capacity, special lithium Complex soap thickened, with a high drop point and outstanding mechanical stability. The additive package incorporates excellent anti-wear, lubricating and EP properties along with high anticorrosive and antioxidant capacity. It is capable of performing well when exposed to water or steam in extreme working conditions.
• A high performance general purpose, extreme pressure grease
• Incorporates a synthetic base oil for superior performance and longer life
• Lithium Complex soap technology
• High temperature capability
• Excellent water resistance
• Inhibited against rust and corrosion
• Resistant to moisture, acid and alkali
• Excellent mechanical stability
General purpose. Plain and anti-friction bearings. Wet applications: paper and textile mills,
laundries, chemical processing mixers, pumps, valves, cams and couplings, small open gears, steel
mills, rubber processing, non-ferrous metals. Mining: surface and underground. Chassis grease.
PACK SIZES:
12 x 400g Cartridges
6 x 1Kg Pails
4.5Kg Pails
22.5Kg Pails
180Kg Drums
TYPICAL PROPERTIES
Properties Test Method Units Typical Results
NLGI NO. 2
Colour and texture Red, smooth
Thickener ASTM D128 Lithium Complex
Base Oil ASTM D128 Synthetic
Base Oil Viscosity at 40°C ASTM D445 cSt 250
Worked Penetration ASTM D217 Mm/10 265-295
Drop Point ASTM D556 °C 285
Oil Separation 18h/40°C DIN 51817 % 0.5
Flow Pressure at -40°C DIN 51805 mBar 800
4 ball tests:
Weld Load IP 239 Kgs 250
Wear Scar dia 1h/40Kg IP 239 mm 0.45
Operating temp. ASTM D2265 °C -18 to 180
Copper Corrosion ASTM D4048 1b
Oxidation Stability ASTM D942 Kg/cm² 0.1
Evaporation Loss ASTM D927 % 0.2
EMCOR Corrosion DIN 51802 % 0-0
Water Washout 1h/80°C ASTM D1264 % 3
HEXANE RESISTANT GREASE
Habot H - L2 HR is a synthetic base grease, specially formulated to be Hexane resistant. It also has excellent resistance to most solvents such as Trichloro Ethane, and chlorinated and aliphatic solvents. Not miscible with hydrocarbons and/or polar solvents and Thicken with a lithium soap.
• Longer service and re-lubrication life
• Extended life of bearings and wear parts
• Insoluble in Hexane
• Total seal compatibility
• Excellent lubricity, anti-wear and extreme pressure properties
Oil mill solvent extractor plants. Flange and thrust bearings. All drive and idler sprockets.
Graphite packing glands. Couplings and bearings on all discharge screws and pumps including
those of the wet fl ake elevators, desolventizer, etc. Any grease application calling for resistance
to carbon disulphide, chlorinated and aliphatic solvents. Excellent in plants that pure organic
seed and hexane is present.
TYPICAL PROPERTIES
Properties Test Method Units Typical Results
NLGI NO. 2
Thickener type Lithium
Base Oil type Synthetic
Drop Point ASTM D566 °C 147
Worked Penetration ASTM D217 265 – 295
Appearance Yellow/grey
Operating Temp. °C -20 to 100
Hexane Resistance Excellent (no wash-off )
1,1,1 Trichloroethane Excellent (no wash-off )
Hexane Immersion No dissolution
No disintegration
Aqueous Solutions No dissolution
No disintegration
PACK SIZES:
12 x 400g Cartridges
6 x 1Kg Pails
4.5Kg Pails
22.5Kg Pails
180Kg Drums
HEAVY DUTY CALCIUM SULFONATE COMPLEX GREASE WITH MOLY
Habot H - CSXM 460 Grease has been carefully formulated using high viscosity base oil and over based calcium sulfonate complex thickener system fortifi ed with Moly and special additives providing this grease outstanding Extreme Pressure properties, exhibiting excellent water repellent, oxidation resistance, and a wide operating temperature range. It is formulated with an innovative and synergistic combination of solid lubricants which physically adhere to metal surfaces and form a strong protective fi lm, preventing welding and reduce friction even under the most severe operating conditions such as very heavy and shock loads. It is a heavyduty extreme pressure grease formulated using high viscosity oil thus exhibiting outstanding fi lm strength and resistance to corrosive salt water environments.
• Calcium sulfonate base with Moly
• High viscosity base oil
• Water Resistant
• Outstanding Extreme Pressure properties
• Wide temperature operability
• Superb rust protection properties
• Extended service life of equipment
• Excellent performance under heavy and shock loads
• Extraordinary performance at high and low temperatures
• Protects equipment from rusting under humid and water ingress conditions
Habot H – CSXM 460 Grease is an obvious choice for virtually any multi-purpose or severe
extreme pressure application, particularly where the end user prefers a Moly fortifi ed grease. It is
recommended for the most severe applications in off -highway construction, mining equipment,
earth moving machines, Caterpillar equipment, as well as other heavy-duty construction and
mining equipment moving at slow to medium speed.
Habot H – CSXM 460 meets and exceeds the demanding automotive and industrial testing
requirements of ASTM D 4950, earning it the GC-LB classifi cation by the National lubricating
Grease Institute. This grease also meets Caterpillar CAT 5% moly requirements.
GREASE CALCIUM SULFONATE COMPLEX
Habot H - CSX2 220 Grease is high performance extreme pressure grease exhibiting outstanding fi lm strength and resistance to corrosive salt water environments. It is made with premium base oils that provide equipment long life and protects against chemical and thermal degradation keeping equipment free from metal to metal contact and temperature under control, ensuring the best protection even under very severe operating conditions. Formula and Manufacturing Process have been perfected over the years to produce the best quality Over Based Calcium Sulfonate Complex Grease with outstanding performance.
• Calcium sulfonate base
• Water Resistant
• Extreme Pressure properties
• High Drop Point – Suitable for high temperature application
• Excellent rust protection properties
• Excellent performance under heavy loads
• Protects equipment from rust
• Does not drip out under working conditions
• Extraordinary performance at high temperatures
• Protects equipment from rusting under humid and water ingress conditions
• Excellent pumping properties and thus recommended for centralized lubrication systems
Habot H – CSX2 220 is recommended for severe applications in many industries. It is
particularly suitable for high speed bearings and centralized lubrication systems. This grease is
recommended for use in automotive as well as extreme pressure applications in construction,
mining, agricultural,Logging and hauling industries. This product is suitable any place where a
shear stable, high load carrying, corrosion resistant grease is required.
TYPICAL PROPERTIES
Properties Test Method Units Typical Results
NLGI NO. 2
Thickener Type
Calcium Sulfonate Complex
Appearance Visual Smooth
Colour Green
Worked Penetration ASTM D217 mm/10 265-295
Drop Point ASTM D2265 280
Base Oil Viscosity @ 40°C ASTM D445 cSt 220
Wheel bearing leakage ASTM D1263 gm 5.0 Max
Timken OK Load ASTM D2509 lb. 65
Rust Test ASTM D1743 Pass
Weld Load ASTM D2596 kg 620
PACK SIZES:
12 x 400g Cartridges
6 x 1Kg Pails
4.5Kg Pails
22.5Kg Pails
180Kg Drums
HIGH TECH SYNTHETIC ALL PURPOSE GREASE
Habot H - SYNTEC Hight Tech Synthetic All Purpose Grease is a high performance lubricating grease capable of working at a wide range of temperatures (from -40 to 180ºC) in very stringent operating conditions. Specially formulated with synthetic base oil enhanced with high chemical and thermal resistance and a high lubricating capacity, special lithium Complex soap thickened, with a high drop point and outstanding mechanical stability. The additive package incorporates excellent anti-wear, Lubricating and EP properties along with high anticorrosive and antioxidant capacity. It is capable of performing well when exposed to water or steam in extreme working conditions.
• A high performance general purpose, extreme pressure grease
• Incorporates a synthetic base oil for superior performance and longer life
• Lithium Complex soap technology
• High temperature capability
• Excellent water resistance
• Inhibited against rust and corrosion
• Resistant to moisture, acid and alkali
• Excellent mechanical stability
General purpose. Plain and anti-friction bearings. Wet applications: paper and textile mills,
Laundries, chemical processing mixers, pumps, valves. Cams and couplings. Small open
gears. Steel mills. Rubber processing. Non-ferrous metals. Mining: surface and underground.
Chassis grease.
TYPICAL PROPERTIES
Properties Test Method Units Typical Results
NLGI NO. 2
Colour and texture Red, smooth
Thickener ASTM D128 Lithium Complex
Base Oil ASTM D128 Synthetic
Base Oil Viscosity @ 40°C ASTM D445 cSt 250
Worked Penetration ASTM D217 Mm/10 265-295
Drop Point ASTM D556 °C 285
Oil Separation 18h/40°C DIN 51817 % 0.5
Flow Pressure @ -40°C DIN 51805 mBar 800
4 ball tests:
Weld Load IP 239 Kgs 250
Wear Scar dia 1h/40Kg IP 239 mm 0.45
Operating temp. ASTM D2265 °C -18 to 180
Copper Corrosion ASTM D4048 1b
Oxidation Stability ASTM D942 Kg/cm² 0.1
Evaporation Loss ASTM D927 % 0.2
EMCOR Corrosion DIN 51802 % 0-0
Water Washout 1h/80°C ASTM D1264 % 3
PACK SIZES:
12 x 500g Tubs
